- Industrial energy-saving products
- High-end screw air compressor
- Energy saving screw air compressor
- LG series screw air compressor
- ML series explosive-proof mining screw air compressor
- Industrial piston air compressor
- Mining series air compressor
- Screw vacuum pump
- Heavy Industry Products and Accessories
- Full hydraulic drilling and tunnelling drilling rig series
- KY series semi-hydraulic open-air crawler rig
- KG series semi-hydraulic open-air crawler rig
- KC series all pneumatic open-air crawler rig
- KT series integral type high wind pressure open-air crawler rig
- KH environmental protection type open-air crawler rig
- KM series anchor drill
- Down the hole drill series
- KW series geotherm water well multifunction drilling rig
- Rock drill
- Air pick
- Air leg
- Air tank
- Screw expansion generator
introduction and Parameter:
"Kaishan" brand KT11S integral type high wind pressure open-air crawler drilling rig is using a power to drive hydraulic system and high wind pressure screw compression system at the same time, compact structure, highly energy utilization, with automatic unloading rod, cabin air conditioner and dry dust collector such functional module. Jumbo has good integrity, environmental protection and energy saving,high degree of automation, drilling effect is good, convenient operation,flexible, driving safety, etc. Suitable for open-pit mine, quarry, highway,railway, water conservancy, electric power, construction and other medium and deep hole in the stone engineering extension rod drilling operations.
KT11S One-piece open-air drilling rig technical parameters: | |||
Rock hardness | f=6-20 | Carriage elevation angle | 114° |
Drilling diameter（mm） | 105-125 | Carriage swing angle | right 36° left 35° |
Economic drill depth (Automatic extension rod depth)m | 18 | Carriage leveling swing angle | right 12°~93° |
Travel speed（Km/h） | 0-2.2 | Drill arm swing angle | right 45° left 5° |
20° | Frame leveling angle | up 10° down 8° | |
Ground clearance（mm） | 430 | Push length(mm) | 3000 |
Machine Power(kW) | 239 | Compensation length(mm) | 1200 |
Commins 6LTAA8.9-C325 | Dill rod | φ76x3000mm | |
Screw capacity(m³/min) | 18 | Catching dust | dry-type（Hydraulic cyclone layer flow） |
Scre wworking Pressurebar | 17 | Jaw way | Automatic discharge rod |
Dimension (mm) | 9300x2580x3000 | Automatic protection card way | electro-hydraulic control card |
Weight(Kg) | 14600 | Drill rod lubricating | Automatic oil lubrication |
Rotating Speed(r/min) | 0-63 | Drill rod thread protection | Equipped with floating joint protection drill rod thread |
2800 | Drill hole angle | Two-dimensional electronic Angle indicator | |
Maximum lifting power(N) | 32000 | Drill hole depth | Electron hole deep instructions |
Hammer | HD45A | ||