- Industrial energy-saving products
- High-end screw air compressor
- Energy saving screw air compressor
- LG series screw air compressor
- ML series explosive-proof mining screw air compressor
- Industrial piston air compressor
- Mining series air compressor
- Screw vacuum pump
- Heavy Industry Products and Accessories
- Full hydraulic drilling and tunnelling drilling rig series
- KY series semi-hydraulic open-air crawler rig
- KG series semi-hydraulic open-air crawler rig
- KC series all pneumatic open-air crawler rig
- KT series integral type high wind pressure open-air crawler rig
- KH environmental protection type open-air crawler rig
- KM series anchor drill
- Down the hole drill series
- KW series geotherm water well multifunction drilling rig
- Rock drill
- Air pick
- Air leg
- Air tank
- Screw expansion generator
introduction and Parameter:
KMD120 type anchoring drill rig is a kind of electric crawler walking, light-weight, high efficiency and multi-function of drill hole equipment, it is mainly suitable for domestic subway, high-rise buildings, airports, ground source heat pump and other deep foundation pit of anchorage, rotary spray and other USES of hole drilling work. The DTH drilling jumbo can be suitable for drill pipe DTH drilling, set of drill and mud pump (clear water pump) drilling, drill pipe and casing drilling technology such as construction method.
KMD120 anchor drill technical parameters:
Weight（Kg） | 7000 |
Dimension（mm） | 5700×2300×2300 |
Travel speed （Km/h） | 0～2.5 |
Power (motor) parameters | 45Kw+15Kw |
Ground clearance （mm） | 245 |
Leg cylinder stroke（mm） | 1000 |
Drilling depth （m） | 120 |
Working pressure（MPa） | 1.05-2.46 |
Capacity（m3/min） | 16-30 |
Drill rod caliber （mm） | （choose）φ79/φ89 |
Drill rod length（mm） | 3000 |
Drilling diameter（mm） | φ105-190 |
Elevation angle | 0-93° |
Promote oil cylinder stroke（mm） | 1750 |
Gyrator speed（rpm） | 12/50/75/100 |
Rotary torque（N·m） | 12/50/75/100 |
Last：MGY60 anchor drill