- Industrial energy-saving products
- High-end screw air compressor
- Energy saving screw air compressor
- Screw expansion generator
- LG series screw air compressor
- Ex-proof mining screw compressor
- Industrial piston air compressor
- Mining series air compressor
- Screw vacuum pump
- Air tank
- Heavy industry products & parts
- KT integrated open-air DTH drill rig
- KG open-air DTH drill rig
- KY open-air DTH drill rig
- Other open-air DTH drill rigs
- KJ intelligent tunneling drill rig
- KS underground mining drill rig
- KW geo/water well multifunction rig
- KM series anchor drill
- KQ electric DTH drill
- Scaling rig & personnel car & rotary rig
- Down-the-hole hammer
- Drill bit
- Rock drill
- Air pick
- Air leg

introduction and Parameter:
Here is the English translation of the paragraph:
It is equipped with a Yuchai off-road four-cylinder engine, meeting national requirements for emissions and environmental protection. It adopts folded track frames and heavy-duty undercarriage components, with track leveling and piston travel motors to increase working pressure and enhance climbing ability. The pitch and boom lift cylinders are enlarged to meet the requirements for operation at extreme positions. The rotary torque and rotational speed are increased. A feed motor and chain drive are used for lifting to improve lifting force and reliability. The dust collector is enlarged to enhance dust collection efficiency. The cover shell uses thickened folded sections to increase strength and rigidity. Lifting rings are added for convenient loading, unloading, and lifting. The KG520H open-pit down-the-hole drill rig is equipped with an enlarged dust collector, making it more environmentally friendly and reliable during operation.
| Item | KG520 | KG520H |
|---|---|---|
| Model of drill rig | KG520 | KG520H |
| Weight of complete machine | 6500 KG | 7000 KG |
| Outer dimensions | 6800×2200×2850 mm | 6800×2350×2850 mm |
| Drilling hardness | f=6-20 | |
| Drilling diameter | Φ105-152 mm | |
| Depth of economical drilling | 25 m | |
| Rotary speed | 0-100 rpm | |
| Rotary torque (Max) | 4000 N·m (Max) | |
| Lifting force | 25 KN | |
| Method of Feed | Motor + roller chain | |
| Feed stroke | 4150 mm | |
| Travelling speed | 0-4 km/h | |
| Climbing capacity | ≤30° | |
| Ground clearance | 440 mm | |
| Tilt angle of Beam | Down: 135°, up: 50°, total: 185° | |
| Swing angle of boom | Left: 50°, right: 50°, total: 100° | |
| Pitch angle of drill boom | Down: 50°, up: 25°, total: 75° | |
| Swing angle of drill boom | Left: 45°, right: 45°, total: 90° | |
| Leveling angle of track | ±10° | |
| Compensation length of beam | 900 mm | |
| Supporting power | Yuchai YC4DK100-T304 (73.5 KW / 2200 r/min) | |
| DTH hammer | 4" | |
| Drilling rod | Φ76×3m or Φ89×3m / Φ76×3m or Φ89×3m | |
| Air consumption | 15-22 m³/min | |
| Maximum height of horizontal hole | 3500 mm | |
| Minimum height of horizontal hole | 350 mm | |
Last:KG500GF型光伏潜孔钻车
Next:KG550型露天潜孔钻车
