- Industrial energy-saving products
- High-end screw air compressor
- Energy saving screw air compressor
- Screw expansion generator
- LG series screw air compressor
- Ex-proof mining screw compressor
- Industrial piston air compressor
- Mining series air compressor
- Screw vacuum pump
- Air tank
- Heavy industry products & parts
- KT integrated open-air DTH drill rig
- KG open-air DTH drill rig
- KY open-air DTH drill rig
- Other open-air DTH drill rigs
- KJ intelligent tunneling drill rig
- KS underground mining drill rig
- KW geo/water well multifunction rig
- KM series anchor drill
- KQ electric DTH drill
- Scaling rig & personnel car & rotary rig
- Down-the-hole hammer
- Drill bit
- Rock drill
- Air pick
- Air leg
KT integrated open-air DTH drill rig
KT9C Integrated Open-pit Down-the-Hole (DTH) Drill Rig
introduction and Parameter:
Here is the English translation of the new paragraph:
It integrates the down-the-hole drilling system and the screw air compression system into one unit, and can drill vertical, inclined, and horizontal holes. It is used for drilling blast holes and pre-split holes in open-pit mines and rock engineering. Equipped with a Yuchai off-road diesel engine and a high-efficiency dust collection system, it meets national requirements for emissions and environmental protection. It features energy efficiency, safety and environmental friendliness, high mobility, convenient operation, and stable performance.
| Item | Specification |
|---|---|
| Drilling hardness | f=6-20 |
| Drilling diameter | Φ115-165 mm |
| Depth of economical drilling | 25 m |
| Travelling speed | 0-3.5 km/h |
| Climbing capacity | ≤25° |
| Ground clearance | 430 mm |
| Power of complete machine | 295 kW / 1900 r/min |
| Diesel engine (choose) | Yuchai YCK09400-T300 |
| Screw compressor | Two stage compression 20 m³/min / 22 bar |
| Outer dimensions (L×W×H) | 8250×2300×3200 mm |
| Weight | 12000 kg |
| Rotation speed of gyrator | 0-100 r/min |
| Rotary torque (Max) | 4000 N·m (Max) |
| Maximum push-pull force | 25 KN |
| Lifting angle of drill boom | Up 50°, down 20° |
| Tilt angle of beam | 120° |
| Swing angle of carriage | Right 50°, left 50° |
| Swing angle of drill boom | Right 38°, left 34° |
| Leveling angle of frame | ±10° |
| One-time advance length | 3590 mm |
| Compensation length | 900 mm |
| DTH hammer | 5" |
| Drilling rod | φ76×3000 mm |
| Method of dust collecting | Dry type (hydraulic cyclonic laminar flow) |