- Industrial energy-saving products
- High-end screw air compressor
- Energy saving screw air compressor
- Screw expansion generator
- LG series screw air compressor
- Ex-proof mining screw compressor
- Industrial piston air compressor
- Mining series air compressor
- Screw vacuum pump
- Air tank
- Heavy industry products & parts
- KT integrated open-air DTH drill rig
- KG open-air DTH drill rig
- KY open-air DTH drill rig
- Other open-air DTH drill rigs
- KJ intelligent tunneling drill rig
- KS underground mining drill rig
- KW geo/water well multifunction rig
- KM series anchor drill
- KQ electric DTH drill
- Scaling rig & personnel car & rotary rig
- Down-the-hole hammer
- Drill bit
- Rock drill
- Air pick
- Air leg

introduction and Parameter:

Here is the English translation of the new paragraph:
It can drill vertical, inclined, and horizontal holes, and is mainly used for drilling blast holes and pre-split holes in large open-pit mines and rock engineering. It uses a Cummins diesel engine as the single power source, which drives both the screw compression system and the hydraulic transmission system through dual-end output. The drill rig is equipped with an automatic rod handling system, a drill rod floating joint module, a drill rod lubrication module, an anti-jamming system, a hydraulic dry dust collection system, a cab with air conditioning for both cooling and heating, and drilling angle and depth display functions. The drill rig features good structural integrity, a high degree of automation, excellent drilling performance, environmental protection and energy efficiency, convenient operation, high mobility, and safe travel.
| Item | Specification |
|---|---|
| Drilling hardness | f=6-20 |
| Drilling diameter | 152-203 mm |
| Depth of economical drilling (depth of automatic extension rod) | 35m / 36m |
| Travelling speed | 3.0 Km/h |
| Climbing capacity | 25° |
| Ground clearance | 410 mm |
| Power of complete machine | 372 Kw |
| Diesel engine | Cummins QSZ13-500-30 |
| Screw compressor | Two stage compression 31 m³/min / 25 bar |
| Outer dimensions (L×W×H) | 12100×2900×3850 mm |
| Weight | 28100 Kg |
| Revolving speed of gyrator | 0-100/0-150 r/min |
| Rotary torque | 6100 N·m |
| Maximum Feed force | 65 KN |
| Tilt angle of beam | 133° |
| Swing angle of carriage | Right 37°, left 37° |
| Swing angle of drill boom | Right 30°, left 17° |
| Lifting angle of drill boom | Up 49°, down 13° |
| Leveling angle of frame | Up 10°, down 10° |
| Compensation length | 1800 mm |
| Method of propulsion | Motor+roller chain |
| Feed stroke | 5700 mm / 6700 mm |
| DTH hammer | 5", 6" |
| Drilling rod (φ×length of drilling rod) | Φ102/Φ114/Φ127×5000 mm or Φ102/Φ114/Φ127×6000 mm |
| Number of drilling rods | 6+1 / 5+1 |
| Method of dust removal | Dry (hydraulic cyclonic laminar flow)/wet (optional) |
| Method of extension rod | Automatic unloading rod |
| Method of automatic anti-jamming | Electro-hydraulic control anti-sticking |
| Method of drilling rod lubrication | Automatic oil injection and lubrication |
| Protection of thread of drilling rod | Equipped with the floating joint to protect the thread of drilling rod |
| Drilling display | Real-time display of drilling angle and depth |
