introduction and Parameter:

National initiative

Specially applied to those industry: textiles, cement, glass.

When your working pressure is 0.2--0.5Mpa,if you choose regular 0.7Mpa air compressor will cause huge waste of electricity ,but choose low pressure screw air compressor underthe same motor power can greatly increase the air production of compressed air,corresponding, you can save 20-50% electricity.

If you purchased the 0.7Mpa machine, and the actual use pressure 0.5Mpa, It’s working process is usually like this:

Screw engine to compressed air to 0.7Mpa, again through the way such as pressure reducing valve to reduce the pressure to 0.5Mpa,that is to say, you are using a pressure of 0.5Mpa,you bear the power consumption is 0.7Mpa.

Also can prove it from the capacity:

One 132kw 0.7Mpa screw air compressor, the capacity should be 24 m3 / min, and choose KHE132kW screw air compressor with 0.5Mpa ,the capacity is more than 30m3 /min! Save the electricity bills will let you disinvestment within one year.

According the working pressure of user. Automatically adjust the compression ratio. the exhaust pressure range of 0.2-0.5Mpa,can keep the best power(energy).

Using oil pump forcedlubrication, ensure that under the low exhaust pressure also has enough fuel injection quantity the best mixing ratio of oil and air.