- Industrial energy-saving products
- High-end screw air compressor
- Energy saving screw air compressor
- LG series screw air compressor
- ML series explosive-proof mining screw air compressor
- Industrial piston air compressor
- Mining series air compressor
- Screw vacuum pump
- Heavy Industry Products and Accessories
- Full hydraulic drilling and tunnelling drilling rig series
- KY series semi-hydraulic open-air crawler rig
- KG series semi-hydraulic open-air crawler rig
- KC series all pneumatic open-air crawler rig
- KT series integral type high wind pressure open-air crawler rig
- KH environmental protection type open-air crawler rig
- KM series anchor drill
- Down the hole drill series
- KW series geotherm water well multifunction drilling rig
- Rock drill
- Air pick
- Air leg
- Air tank
- Screw expansion generator
introduction and Parameter:
Kaishan brand ZL138A full hydraulic open-air drilling rig is a integrated with screw air compressor system, hydraulic impact drilling system, dry dust collection system of open-air drilling equipment, suitable for water and electricity, railway, traffic, open-air mine, quarry, national defence engineering and various kinds of large construction projects in 64-102 - mm drill blasting holes, bolt holes, etc.
Main features:
1.Equipped with Kaishan group independent production DZYG38B type hydraulic rock drill;
2.High drilling efficiency, 1-1.5 times higher than the same kind of drilling rig;
3.Low energy consumption, lower than the same kind of pneumatic drilling rig 1/3- 2/3;
4.Stoutness structure, compact layout, passing ability, good cross-country performance;
5.Safety of operation, low dust, low noise.
ZL138A full hydraulic open-air drilling rig technical parameters:
64-102mm | |
Economic hole depth | 18m |
Walking speed | 2 Km/h |
Climb capacity | 30° |
Ground clearance | 430mm |
Motor power | 112Kw |
Diesel engine | Cummins6BTA5.9-C150 |
Capacity | 5 m³/min |
Working pressure | 7 |
Dimension | 8000x2260x2800mm |
Weight | 9000kg |
Carriage lift angle | up 28° down 42° |
Carriage elevation angle | 129° |
Carriage swing angle | Right 38°left 35° |
Carriage lateral swing angle | Right 4°－89° |
Drill arm swing angle | Right 39°left 60° |
Frame Leveling angle | Up 10°down9° |
Push length | 3050mm |
Compensation Length | 900mm |
Hydraulic rock drill | DZYG38B |
Steel rod | T45×3050mm |
Dust collecting mode | Dry (hydraulic cyclone flow) |
DZYG38B hydraulic rock drill technical parameters:
Weight | 150kg |
Impact pressure | 15-21.5mpa |
Rotating pressure | 10mpa |
Torque (max) | 0-750 N·m |
40-60Hz | |
Rotating speed | 0-300 r/min |
Installed power | 45Kw |