- Industrial energy-saving products
- High-end screw air compressor
- Energy saving screw air compressor
- LG series screw air compressor
- ML series explosive-proof mining screw air compressor
- Industrial piston air compressor
- Mining series air compressor
- Screw vacuum pump
- Heavy Industry Products and Accessories
- Full hydraulic drilling and tunnelling drilling rig series
- KY series semi-hydraulic open-air crawler rig
- KG series semi-hydraulic open-air crawler rig
- KC series all pneumatic open-air crawler rig
- KT series integral type high wind pressure open-air crawler rig
- KH environmental protection type open-air crawler rig
- KM series anchor drill
- Down the hole drill series
- KW series geotherm water well multifunction drilling rig
- Rock drill
- Air pick
- Air leg
- Air tank
- Screw expansion generator
KY series semi-hydraulic open-air crawler rig
KY100J semi-hydraulic low wind pressure open-air crawler drilling rig
introduction and Parameter:
New type of propel institution
Adopt oil cylinder chain pulley propulsion mode, compact structure, improve big,good stability.
Brand power
Adopt famous brand single-cylinder diesel engine as power, simple structure, easily maintenance.
Reliable hydraulic system
Using special hydraulic components, improve the stability and reliability of the system.
Add the oil cooling equipment, eliminate the influence of hydraulic oil heating to the system.
KY100J Low wind pressure crawler drilling rig technical parameters: | |||
|---|---|---|---|
Rock hardness | f=6~20 | Ground clearance（mm） | 254 |
Drilling diameter（mm） | 80~105 | Travel speed（Km/h） | 0--2.0 |
| Economic drill depth（m） | 20 | Drill arm angle | - |
| Working pressure（MPa） | 0.7~1.4 | Swing angle of drill boom | - |
| Capacity（m^3/min） | ≥10 | Carriage swing angle | -11.5°~+36.5° |
| Rotating speed（rpm） | 0~65 | Carriage elevation angle | -118.5°~+23.5° |
| Lifting power（KN） | 15 | Carriage compensation（mm） | 900 |
| Rod specifications（mm） | 60x2000 | Dimension（mm） | 4100x2030x2020 |
| Gradeability | 30° | Weight（Kg） | 3100 |
| Notes | pneumatic hydraulic | Power | ZS1125GM（20.2kW2200r/min） |