- Industrial energy-saving products
- High-end screw air compressor
- Energy saving screw air compressor
- LG series screw air compressor
- ML series explosive-proof mining screw air compressor
- Industrial piston air compressor
- Mining series air compressor
- Screw vacuum pump
- Heavy Industry Products and Accessories
- Full hydraulic drilling and tunnelling drilling rig series
- KY series semi-hydraulic open-air crawler rig
- KG series semi-hydraulic open-air crawler rig
- KC series all pneumatic open-air crawler rig
- KT series integral type high wind pressure open-air crawler rig
- KH environmental protection type open-air crawler rig
- KM series anchor drill
- Down the hole drill series
- KW series geotherm water well multifunction drilling rig
- Rock drill
- Air pick
- Air leg
- Air tank
- Screw expansion generator
introduction and Parameter:
KG935 type open-air drill rig on the basis of KG930B drilling rig, optimize and upgrade the walking components, carriage parts, drilling arm parts and machine layout, mainly has the following characteristics:
1.The vehicle configuration of domestic well-known brand Yuchai YC4D80 diesel engine, the power is strong, reliable in performance.
2.Using the wheel motor and configure the travel mechanism of automatic leveling function, more can adapt to the rugged mountain path.
3.Hydraulic system is optimized, using the famous factory hydraulic components, low failure rate.
4.Large Angle luffing mechanism, which can meet the demand of different station, reduce the auxiliary time improve work efficiency.
5.Configure roller skateboard parts, reduce the guide rail wear
KG935 Open-air drilling rig technical parameters: | |
Rock hardness | f=6-20 |
Drilling diameter(mm) | φ105-140 |
Economic drill deep（m） | 25 |
0～2.5 | |
Gradeability（ °） | 30 |
Minimum ground clearance（mm） | 320 |
Engine Model（Yucai） | YC4D80（58kW/2400rpm） |
Dimension（mm） | 5400×2330×2020 |
Weight（Kg） | 6500 |
Working Pressure（MPa） | 1.05-2.46 |
Carriage stroke（mm） | 3000 |
Carriage maximum angle（ °） | 180 |
Carriage maximum swing angle（ °） | right 50º（15º） left 50º（95º） |
Drilling arm maximum horizontal swiing angle（ °） | right 45º left 45º |
Crawler leveling angle | ±10º |
Compensation route（mm） | 1200 |
Rotating speed（rpm） | 0-100 |
2800 | |
Lifting power（KN） | 25 |
φ76×3000φ89×3000 | |
first2000/ remaining six3000 | |