- Industrial energy-saving products
- High-end screw air compressor
- Energy saving screw air compressor
- LG series screw air compressor
- ML series explosive-proof mining screw air compressor
- Industrial piston air compressor
- Mining series air compressor
- Screw vacuum pump
- Heavy Industry Products and Accessories
- Full hydraulic drilling and tunnelling drilling rig series
- KY series semi-hydraulic open-air crawler rig
- KG series semi-hydraulic open-air crawler rig
- KC series all pneumatic open-air crawler rig
- KT series integral type high wind pressure open-air crawler rig
- KH environmental protection type open-air crawler rig
- KM series anchor drill
- Down the hole drill series
- KW series geotherm water well multifunction drilling rig
- Rock drill
- Air pick
- Air leg
- Air tank
- Screw expansion generator

introduction and Parameter:
KG925 type open-air drill rig on the basis of KG920B drilling rig, innovative design the guide rail, gyrator, crawler frame, operating floor and the machine layout, mainly has the following characteristics:
1.Extension of the guide rail, to promote travel up to 3.4 m, shallow hole without extension rod.
2.Using cycloid motor gyrator, high speed, long service life
3.Rotary speed up to 140 r/min, soft rock borehole faster and hard rock borehole can use the accelerator and slow gear to reduce speed.
4.Operating handle centralized layout, and equipped with pedals, tidy and beautiful, easy to operate.
5.Strengthen the crawler frame, like excavators, appearance beautiful, strong and durable;
KG925 Open-air drilling rig technical parameters: | |
Rock hardness | f=6-20 |
Drilling diameter(mm) | φ80-115 |
Economic drill deep(m) | 25 |
0~2.5 | |
Gradeability( °) | 30 |
Minimum ground clearance(mm) | 320 |
Engine model(Yucai) | YC4D80(58kW/2400rpm) |
Dimension(mm) | 5680×2130×2100 |
Weight(Kg) | 4600 |
Working pressure(MPa) | 0.7-1.7 |
Carriage stroke(mm) | 3400 |
Carriage maximum angle( °) | 185 |
Carriage maximum swing angle( °) | right 100º(45º) left 5º(45º) |
Drilling arm maximum horizontal swiing angle( °) | right 45º lift 45º |
Compensation route(mm) | 900 |
Rotating speed(rpm) | 0-140 |
1400 | |
Lifting power(KN) | 25 |
φ64(Standard ) φ76 | |
3000 | |
