- Industrial energy-saving products
- High-end screw air compressor
- Energy saving screw air compressor
- LG series screw air compressor
- ML series explosive-proof mining screw air compressor
- Industrial piston air compressor
- Mining series air compressor
- Screw vacuum pump
- Heavy Industry Products and Accessories
- Full hydraulic drilling and tunnelling drilling rig series
- KY series semi-hydraulic open-air crawler rig
- KG series semi-hydraulic open-air crawler rig
- KC series all pneumatic open-air crawler rig
- KT series integral type high wind pressure open-air crawler rig
- KH environmental protection type open-air crawler rig
- KM series anchor drill
- Down the hole drill series
- KW series geotherm water well multifunction drilling rig
- Rock drill
- Air pick
- Air leg
- Air tank
- Screw expansion generator
introduction and Parameter:
KG915 type open-air drill rig on the basis of KG910B drilling rig, innovative design of drill arm, rack for rods and operating floor, mainly has the following characteristics:
1.Innovative design of slide block and drill arm parts, make the pendulum Angle fulcrum can hit horizontal and vertical hole at the same time, and horizontal hole ultra-low.
2.Adjustable drill pipe rack, convenient operation, low physical effort.
3.Operating handle centralized layout, and equipped with pedals, tidy and beautiful, easy to operate.
4.To speed up the rotation speed (maximum 120 r/min), to meet the market demand.
Ultra-low vehicle design, flexible guide bracket, convenient transportation.
KG915 Open-air drilling rig technical parameters: | |
Rock hardness | f=6-20 |
Drilling diameter(mm) | φ80-105 |
Economic drill deep（m） | 25 |
0～2.5 | |
Gradeability（ °） | 30 |
Minimum ground clearance（mm） | 320 |
Engine Model（Yucai） | YC2108（33kW/2200rpm） |
Dimension（mm） | 4600×2120×1800 |
Weight（Kg） | 3900 |
Working Pressure（MPa） | 0.7-1.4 |
Carriage stroke（mm） | 3000 |
Carriage maximum angle（ °） | 185 |
Carriage maximum swing angle（ °） | right100º（45º） left5º（45º） |
Carriage maximum swing angle（ °） | right45º left45º |
compensation route（mm） | 900 |
Rotating speed（rpm） | 0-120 |
983 | |
Lifting power（KN） | 17 |
φ60 | |
2000 | |