- Industrial energy-saving products
- High-end screw air compressor
- Energy saving screw air compressor
- LG series screw air compressor
- ML series explosive-proof mining screw air compressor
- Industrial piston air compressor
- Mining series air compressor
- Screw vacuum pump
- Heavy Industry Products and Accessories
- Full hydraulic drilling and tunnelling drilling rig series
- KY series semi-hydraulic open-air crawler rig
- KG series semi-hydraulic open-air crawler rig
- KC series all pneumatic open-air crawler rig
- KT series integral type high wind pressure open-air crawler rig
- KH environmental protection type open-air crawler rig
- KM series anchor drill
- Down the hole drill series
- KW series geotherm water well multifunction drilling rig
- Rock drill
- Air pick
- Air leg
- Air tank
- Screw expansion generator
introduction and Parameter:
KG910E type drill rig by electric motor and diesel engine combined drive the hydraulic pump to provide motives for the hydraulic system. Crisscross use electric motor and diesel engine, in the absence of the power converter using diesel engine, convenience users for a relatively long distance movement and transitions, Under the condition of power use electric motor with safe environmental protection, low noise, using the characteristics of low cost.
Dynamic condition: Main power: electric motor Y180L - 4 22 KW / 1470 RPM
Vice motivation: diesel engine CFZS1125GM 18.4 KW / 2200 RPM
Walking components: Ball plug the motor + planetary gear reducer, increase climbing ability, reduce the working system pressure, from 15 mpa to 11 mpa, increase walking motor’s life.
Hydraulic system: adopting the large displacement gear oil pump, improve the rotary speed, up to 120 r/min, the fast rotating/fast lift valve group, change to new diverter valve.
Gyrator: Using cycloid motor with high torque motor at low speed to instead of steel ball motor, improve the motor life; Air intake isolated with revolving shell, prevent compressed air through revolving shell and motor into the fuel tank.
KG910E Open-air drilling rig technical parameters: | |
Rock hardness | f=6-20 |
Drilling diameter(mm) | φ80-105 |
Economic drill deep（m） | 25 |
0～2.5 | |
Gradeability（ °） | 30 |
Minimum ground clearance（mm） | 254 |
Engine Model（Yucai） | Electric（22kW）diesel （18.4kW） |
Dimension（mm） | 4100×2100×2100mm |
Weight（Kg） | 3300 |
Working Pressure（MPa） | 0.7-1.0 |
Carriage stroke（mm） | 3000 |
Carriage maximum angle（ °） | bow118.5°～upward23.5°total142° |
Carriagemaximumswing angle（ °） | left36.5°～right11.5°total48° |
compensation route（mm） | 900 |
Rotating speed（rpm） | 0-120 |
983 | |
Lifting power（KN） | 17 |
φ60 | |
2000 | |