- Industrial energy-saving products
- High-end screw air compressor
- Energy saving screw air compressor
- LG series screw air compressor
- ML series explosive-proof mining screw air compressor
- Industrial piston air compressor
- Mining series air compressor
- Screw vacuum pump
- Heavy Industry Products and Accessories
- Full hydraulic drilling and tunnelling drilling rig series
- KY series semi-hydraulic open-air crawler rig
- KG series semi-hydraulic open-air crawler rig
- KC series all pneumatic open-air crawler rig
- KT series integral type high wind pressure open-air crawler rig
- KH environmental protection type open-air crawler rig
- KM series anchor drill
- Down the hole drill series
- KW series geotherm water well multifunction drilling rig
- Rock drill
- Air pick
- Air leg
- Air tank
- Screw expansion generator
introduction and Parameter:
KG910C type drill rig by electric motor and diesel engine combined drive the hydraulic pump to provide motives for the hydraulic system. Crisscross use electric motor and diesel engine, in the absence of thepower converter using diesel engine, convenience users for a relatively long distance movement and transitions, Under the condition of power use electric motor with safe environmental protection, low noise, using the characteristics of low cost.
KG910C Open-air drilling rig technical parameters: | |
Rock hardness | f=6-20 |
Drilling diameter(mm) | φ80-105 |
Economic drill deep（m） | 25 |
0～2.5 | |
Gradeability（ °） | 30 |
Minimum ground clearance（mm） | 254 |
Engine Model（Yucai） | Electric（22kW）diesel （18.4kW） |
Dimension（mm） | 4100×2100×2100mm |
Weight（Kg） | 3300 |
Working Pressure（MPa） | 0.7-1.0 |
Carriage stroke（mm） | 3000 |
Carriage maximum angle（ °） | bow118.5°～upward23.5°total142° |
Carriagemaximumswing angle（ °） | left36.5°～right11.5°total48° |
compensation route（mm） | 900 |
Rotating speed（rpm） | 0-120 |
983 | |
Lifting power（KN） | 17 |
φ60 | |
2000 | |