- Industrial energy-saving products
- High-end screw air compressor
- Energy saving screw air compressor
- LG series screw air compressor
- ML series explosive-proof mining screw air compressor
- Industrial piston air compressor
- Mining series air compressor
- Screw vacuum pump
- Heavy Industry Products and Accessories
- Full hydraulic drilling and tunnelling drilling rig series
- KY series semi-hydraulic open-air crawler rig
- KG series semi-hydraulic open-air crawler rig
- KC series all pneumatic open-air crawler rig
- KT series integral type high wind pressure open-air crawler rig
- KH environmental protection type open-air crawler rig
- KM series anchor drill
- Down the hole drill series
- KW series geotherm water well multifunction drilling rig
- Rock drill
- Air pick
- Air leg
- Air tank
- Screw expansion generator
KG series semi-hydraulic open-air crawler rig
KG910A semi-hydraulic low wind pressure open-air crawler drilling rig
introduction and Parameter:
KG910A type open-air drill rig retained KY100J type drill rig the characteristics of simple structure and stable performance, optimize and upgrade the hydraulic system, working components and gyrator,faster rotary speed and advancing speed, longer motor service life,better reliability.
| KG910A Open-air drilling rig technical parameters: | |||
|---|---|---|---|
| Rock hardness | f=6-20 | Weight（Kg） | 3100kg |
| Drilling diameter（mm） | Φ80-105mm | Dimension（mm） | 4100x2030x2020 |
| Economic drill deep（m） | 25m | Carriage elevation angle | bow118.5°~upward23.5°total142° |
| Rotating speed | 105r/min | Carriage swing angle | left36.5°~right11.5°total48° |
| Rotating torque | 980N·m | Drill arm elevation angle | ---- |
| Lifting power | 15000N | Carriage compensation | 900mm |
| Propulsion mode | cylinder-chain | Power | ZS1125GM（20.2kW 2200r/min) |
| Feeding stroke | 2000mm | Drill rod | Φ60 |
| Traveling speed | 0-2.0Km/h | Working Pressure | 0.7-1.4 MPa |
| Gradeability | 30° | Capacity | 9-13m³/min |
| Ground clearance | 254mm | ||
| Improvement comparison | |||
|---|---|---|---|
| KG910A | KY100 | Notes | |
| Walking components | motor+gear reducer structure | Steel motor direct | Reduce the motor pressure, improve motor lifetime |
| Walking pressure | 11MPa | 14-16Mpa | |
| Hydraulic system | 19.2 pump，Fast rotating/fast lift valve group, new diverter valve | 16pump | Increasing flow |
Rotating motor | gerotor motor | Steel motor | improve the motor lifetime |
| Rotating speed | 85r/min(diesel1700r/min) 105r/min(diesel2200r/min) | 70r/min(1700) | rotating improve20% |
Fltting speed | 336mm/s | 280mm/s | improve 20% |