- Industrial energy-saving products
- High-end screw air compressor
- Energy saving screw air compressor
- Screw expansion generator
- LG series screw air compressor
- Ex-proof mining screw compressor
- Industrial piston air compressor
- Mining series air compressor
- Screw vacuum pump
- Air tank
- Heavy industry products & parts
- KT integrated open-air DTH drill rig
- KG open-air DTH drill rig
- KY open-air DTH drill rig
- Other open-air DTH drill rigs
- KJ intelligent tunneling drill rig
- KS underground mining drill rig
- KW geo/water well multifunction rig
- KM series anchor drill
- KQ electric DTH drill
- Scaling rig & personnel car & rotary rig
- Down-the-hole hammer
- Drill bit
- Rock drill
- Air pick
- Air leg

introduction and Parameter:
Here is the English translation of the paragraph:
The KW180 multifunctional water well and geothermal drill rig is an upgraded model based on previous versions. It is equipped with a Yuchai four-cylinder China-III off-road diesel engine, meeting national requirements for emissions and environmental protection. The hydraulic system, supporting configurations, and exterior appearance have been optimized, resulting in more stable performance and higher working efficiency. It features dual-motor rotation, increasing both rotary torque and rotational speed. Users can optionally equip a 1-ton winch for convenient lifting of drilling tools, and 1.5-meter-stroke outrigger cylinders are installed to facilitate truck loading and transportation of the drill rig.
| Item | Specification |
|---|---|
| Rock hardness | f=8-12 |
| Drilling diameter | Φ115-305 mm |
| Depth of economical drilling | 350 m |
| Travelling speed | 0-3.0 Km/h |
| Climbing capacity | ≤20° |
| Ground clearance | 280 mm |
| Power of complete machine | 92 Kw |
| Diesel engine | Cummins QSB3.9-C125 |
| Dimensions (L×W×H) | 6400×2250×2400 mm |
| Weight | 9000 KG |
| Rotation speed of gyrator | 0-75(0-150) r/min |
| Rotary torque (Max) | 7500 N·m |
| Lifting capacity (Max) | 180 KN |
| Lifting method | Hydraulic cylinder + plate chain |
| Advance stroke (Max) | 6600 mm |
| Maximum lifting speed of the skateboard | 26 m/s |
| Maximum propulsion speed of the skateboard | 55 m/s |
| Fuel tank capacity | 120 L |
| DTH hammer | 5"-8" |
| Drilling rod | Φ76, Φ89, Φ102 |
| Gas consumption | 16-73 m³/min |
| Matching winch | 1T |
| Drilling method | Down-the-hole hammer or mud pump, etc. |
